Home » Configurations

Get to know 2-Panel RollaWall Kits

Below are just some of many possible configurations. Kits are shown at 2175mm high. A 1m x 1m floor grid is illustrated. Varying accessories have been added to some of these illustrations.

  • Two RollaWall banners for use either individually or linked together. If graphics need to be updated they can be easily unhooked from the stand and a new graphic attached, all within about 30 seconds.

  • One of RollaWall's unique selling points is its ability to seamlessly link together. Graphics magnetically connect in moments to create a straight wall of graphics. Another unique benefit are RollaWall iPad holders.

  • RollaWall banners can be connected in two ways; either directly together to create straight walls of graphics or using a 'Corner Panel' to create a bend in the wall. A Corner Panel is a separate flexible panel that magnetically connects between any RollaWall banner.

  • RollaWall screen solutions up to 32in are available. Screen mount to the outside of graphic. Screens can be combined with other accessories including iPad holders and counters to create fantastic easy-setup displays.

  • Bundle Option: This configuration consists of 2 RollaWall banners, an iPad holder, 2 lights and a wheeled case with graphic wrap and top. Everything fits within the wheeled case.

  • Bundle Option: This configuration consists of 2 RollaWall banners, a 24in screen solution, 2 lights and a wheeled case with graphic wrap and top. Everything fits within the wheeled case.

  • A corner panel has been inserted between two RollaWall banners allowing them to bend around a corner - even up to 90 degrees.

  • Corner panels can also be used to create a backward bend up to 45 degrees.

  • The maximum size screen for a RollaWall display is 32in provided a minimum of two RollaWall banners are linked. On a single RollaWall banner the maximum size screen is 28in.